One-component, high-performance, flexible S1, lightweight cementitious adhesive C2, with no vertical slip T, extended open time E and extremely high yield. Easy to apply by trowel with excellent wetting properties, very low emission of volatile organic co

The special AERO Technology used to manufacture AVAGEL AERO gives it a low density, a characteristic which offers two main advantages:

1. Bags of AVAGEL AERO have the same volume but weigh less (15 kg) than bags of conventional cementitious adhesive (25 kg). This makes for easier handling and savings in transport costs;
2. Higher yield: yield is approximately 60% higher compared with conventional Avalon cementitious adhesives.

1. Bonding all types and sizes of ceramic tiles (double fired, single-fired, porcelain, klinker, terracotta, etc.) on uneven internal and external substrates, without having to even out the surface before fixing.
2. Bonding all types of mosaic on internal and external surfaces, swimming pools.
3. Bonding natural stone on internal and external surfaces (for stone which is stable and not sensitive to humidity).
4. Bonding thin porcelain tiles (3-5 mm), even large format (150x300 cm), on floors and walls, including external façades.

AVAGEL AERO is a grey or white powder made from cement, selected graded sand and a high amount of synthetic resin, with recycled silica micro-spheres which helps to make the mix lighter, according to a special formula developed in Avalon’s own Research & Development laboratorie, as a contribution towards a sustainable building industry.

AVAGEL AERO mix has a low viscosity, which makes application quicker and easier. In spite of the above characteristics, the thixotropic nature of AVAGEL AERO means there is no vertical slip when fixing on walls, even with large-sized tiles. Its excellent back-buttering capacity and thixotropic consistency make AVAGEL AERO particularly suitable for laying thin porcelain tiles.
In fact, the application of AVAGEL AERO using the double-buttering technique on flat substrates ensures that there are absolutely no voids in the adhesive on the back of the tiles, thus avoiding the risk of fracture when subject to load. Its excellent non-slip properties also make it particularly easy and safe to fix tiles on vertical surfaces.

• Mixing ratio: 15 kg of AERO FLEX grey with 6,0 L of water
• pH of mix: more than 12
• Pot life of mix: more than 8 hours
• Application temperature range: from +5°C to +40°C
• Open time (according to EN 1346): > 30 minutes
• Adjustment time: 45 minutes
• Grouting tile joints on walls: after 4-8 hours
• Grouting tile joints on floors: after 24 hours
• Set to light foot traffic: 24 hours
• Ready-to-use: 14 days
• In service temperature range: from -30°C to +90°C
• Deformability according to EN 12002: S1 - deformable (> 2.5 mm, < 5 mm)

• 0.8 kg/m² per mm of thickness, equal to 1.5-2.5 kg/m².

• AERO FLEX is available in 15 kg paper bags, 48 bags on pallet.

• Technical Data Sheet
• Safety Data Sheet
• Declaration of performance